Gold Paint

Application Data

METHOD:
Roller, brush and spray

THEORETICAL COVERAGE:
7-8 m² / litre

DRYING TIME:
Touch Dry – 1-2 hours at 30°C
Hard Dry – 2-4 hours at 30°C

OVERCOATING TIME:
2-4 hours minimum at 30°C

Surface Preparation

Masonry Wall

Ensure surface is clean, dry and stable using the following suggested surface treatments:

• Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
• Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
• Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
• Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
• Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler

Metal
The surface of the substrate must be:

• Clean/Dry
• Free for grease/oil
• Free from rust/foreign matter
• Free from unstable old film

Exposed metal must be primed with:
Non-ferrous: Hi-Vinyl 1102 CF Etching Primer
Ferrous: Aqua Primer Sealer Undercoat

Wood
Prepare by sanding to establish a smooth clean surface which is then applied with 1-2 coats of Aqua Primer Sealer Undercoat depending on wood species.