Odour-less Ultra Sealer 5102 is a high quality, water based, environmentally favorable product with low odour and VOCs (Volatile Organic Compounds)
during application and drying. It is formulated for use on interior and exterior masonry surfaces to resist alkaline attack and provide good substrate adhesion for subsequent topcoats.
Application Data
METHOD: Roller or brush
THEORETICAL COVERAGE: 10 – 12m² /litre (30 μm DFT/coat), depending on surface texture, substrate porosity and method of application
DRYING TIME: Surface Dry – 30 minutes at 30°C Hard Dry – 1 hour at 30°C
OVERCOATING TIME: 2 hours based on normal conditions
Surface Preparation
Ensure surface is clean, dry and stable using the following suggested surface treatments:
Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
Hairline cracks: Fill cracks with suitable exterior grade water- resistant putty or filler
