Odour-less All-in-1 1 Litre

Application Data

METHOD:
Roller or brush

THEORETICAL COVERAGE:
10-12 m² / litre

DRYING TIME:
Surface Dry – 30 minutes at 30°C
Hard Dry – 2 hours at 30°C

OVERCOATING TIME:
2 hours minimum based on normal conditions

Surface Preparation 

Ensure surface is clean, dry and stable using the following suggested surface treatments:

• Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application
• Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable
• Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry
• Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours
• Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler