Timbercoat

Application Data

METHOD:
Brush, roller or conventional spray

THEORETICAL COVERAGE:
Approx. 10-12 m² / litre depending on surface porosity

DRYING TIME:
Touch Dry – 1 hour at 30°C

OVERCOATING TIME:
2 hours based on normal conditions

Surface Preparation

• Surface must be clean, dry and free from grease, paint, wax and polishes. Sand to smooth surface with suitable abrasive paper, working in the direction of the grain, before dusting off.
• Clean off mould, algae, lichen and moss with a wire brush, before treating any fungus growth with Anti-Fungus Solution.
• For previously painted wood, smoothen the surface with sandpaper, clean off and dry prior to application.
• Do not apply over wood varnish, shellac and lacquers.