(Include Free Gift Synthetic Paint Brush & Sandpaper)
Aqua Wood Stain Durable Water Base Wood Coating
Production Description
Good UV and weather resistance
Resistance to fungal & algal growth
Good water resistant
Water-base
Easy to apply and clean
Good penetration and adhesion
Low sheen
Application Data
METHOD: Brush
THEORETICAL COVERAGE: Approx. 13-17 m2 / litre per coat (depending on surface porosity)
DRYING TIME: Surface Dry – 1 hour at 30°C Hard Dry – 1.5 hours at 30°C
OVERCOATING TIME: Minimum 4 hours under normal conditions
Surface Preparation
New or unpainted wood surfaces :
Surface must be clean, dry and free from grease, paint, wax, dirt and other contaminants before painting
Clean off mould, algae, lichen and moss with a wire brush
Smooth bare wood surface to be painted using grade #60 or #80 sandpaper, working in the direction of the grain before dusting off
If necessary, fill the wood grains with appropriate filler and smooth with sandpaper (grade #150 or #180)
Wood must be relatively dry and moisture content should not exceed 20% based on Sovereign Moisture Master before painting.
Allow the paint to dry thoroughly before applying next coat
If necessary, sand lightly between coats to remove any raised grain before subsequent coats.
Previously Painted Wood Surfaces :
If the previous paint film is in sound condition and without wax, smoothen it with sandpaper. Clean off and dry
For old paint which is in sound condition and without wax, smoothen it with sandpaper. Clean off and dry
Otherwise, remove all unstable paint film, dust, oil, wax and other foreign matters
Particular care is necessary on previously waxed surfaces and thorough mechanical sanding is recommended to remove all wax. Presence of wax on substrates will affect the drying and adhesion of the paint coating
